EMT Practice Test

1. Question Content...

---

Question1: Refer to the exhibit.

Symantec Data Loss Prevention's four phases of risk reduction model provides a blueprint for identifying and remediating key risk areas without disrupting legitimate business activity.
According to best practices, which option should be enabled during the baseline phase of policy risk reduction?

Question2: You have a Storage Foundation 5.0 server named SrvA connected to SrvB, which is a cloned server of SrvA. SrvA is able to recognize the quick I/O (QIO) files. However, SrvB is unable to recognize the quick I/ O files. You have ensured that the file systems are the same on both the servers. You want to ensure SrvB is able to recognize the quick I/O files.
What should you do? (Select two. Each correct answer presents part of the solution.)

Question3: You are managing a Storage Foundation 5.0 server that has Storage Foundation Management Server (SFMS) software installed. You force a placement policy to a file system using the Storage Foundation Management Server (SFMS).
What is the outcome when a policy is forced to a file system?

Question4: Which user store is essential for using the user risk summary feature?

Question5: In which two ways can the default listener port for a detection server be modified? (Select two.)

Question6: When you are administrating Veritas Volume Manager on the Solaris platform, you want to remove a disk using vxdiskunsetup command from the Veritas Volume Manager without erasing the VxVM metadata on the disk.
What is the necessary step you need to do before running the command in the scenario and to prevent a data loss?

Question7: Which RAID-levels are the parts of Data Redundancy layout? (Each correct answer presents part of the solution. Select three.)

Question8: Which two fallback options are available for a 'Network Prevent: Remove HTTP/HTTPS' content response rule when a web-based message contains confidential data? (Select two.)

Question9: What is the default limit to the number of subdisks that can be attached to a single plex?

Question10: Which two actions should an organization take when deploying Endpoint Prevent according to Symantec best practices? (Select two.)

Question11: When the system is configured to boot a volume from the root system, you get an error "VxVM vxconfigd ERROR V-5-1-1049 System boot disk does not have a valid rootvol plex".
How will you resolve this error?

Question12: What should an incident responder select to remediate multiple incidents simultaneously?

Question13: Which command will you use to determine the operating mode of vxconfigd?

Question14: You have installed site awareness licenses on all hosts in the remote mirror configuration. You want the volume to be automatically mirrored across sites when it is created and you specify the allsites=on attribute with the vxassist command.
Which read policy do you need to set to accomplish this task?

Question15: You have just installed Storage Foundation 5.0 with Veritas Volume Manager and Veritas File System. You want to ensure that you are able to successfully install Veritas FlashSnap Agent for Symmetrix 5.0 on Storage Foundation server.
What should you do to ensure you meet the required goal?

Question16: You are using Veritas Enterprise Administrator (VEA) to create a volume set. You need to have e is a pre- requisite in place before you can create the new volume set.
What should you do?

Question17: You are administering the Storage Foundation 5.0 environment in your organization. There is one particular file system that continually shows a high level of fragmentation.
What should you do to prevent fragmentation?

Question18: While performing a VxVM operation, you discover that the disk group configuration has become corrupt.
You want to check the changes in the VxVM configuration data and automatically record any configuration changes that occur.
What would you do in this situation?

Question19: Which traffic type is excluded from analysis when an administrator uses Network Monitor?

Question20: An administrator is checking System Overview and all of the detection servers are showing as 'unknown'.
The Vontu services are up and running on the detection servers. Thousands of .IDC files are building up in the Incidents directory on the detection servers. There is good network connectivity between the detection servers and the Enforce server when testing with the telnet command. How can the administrator bring the detection servers to a running state in the Enforce UI?

Question21: You are working in a production environment. You need to reconfigure the layout of a concatenated volume to a striped volume using the command line without taking the volume offline. You must ensure availability of the volume. What should you do? (Each correct answer presents part of the solution.) (Select two.)

Question22: Which two operating systems are supported for Symantec Data Loss Prevention 12 servers? (Select two.)

Question23: You are the administrator of Veritas Volume Manager in Veritas Storage Foundation environment. You want to remove a disk from a disk group. You execute the command vxdg -g dg01rmdisk d001. After executing the command, you are prompted with the error "VxVM vxdg ERROR V-5-552 disk diskname is used by one or more subdisks." You want to ensure you are able to remove the disk from the disk group.
What should you do?

Question24: After installing Veritas Enterprise Administrator, you start the VEA with the profile name that you have specified. When you click the Console View, what does it display? (Select two.)

Question25: You have installed all the features for Storage Foundation for DB2. On the VxFS file system, you execute a command /opt/VRTS/bin/qiomkfile -s 500m /db01/dbfile.
What will be the outcome of this command?

Question26: How many free partitions do you need to encapsulate a boot disk?

Question27: An administrator receives the following error:
Error Code:3018 lt;profile name> has reached maximum size. Only 44245 out of 97737 documents are indexed.
What must the administrator do to resolve this error?

Question28: You need to create a volume for the HR department. You need to mount a file system with a high demand for I/O throughput. You are aware that spanning the volume across multiple disks will increase the I/O performance. Which risk should you be aware of when spanning the volume across multiple disks?

Question29: The VxVM operation fails while importing a disk group and you get an error message "VxVM vxdg ERROR V-5-1-2907 diskgroup: Disk group does not exist"
How will you solve this problem?

Question30: Which server encrypts the message when using a Modify SMTP Message response rule?

Question31: You are monitoring the Storage Foundation 5.0 environment in your organization. A disk starts receiving intermittent I/O errors and shows signs of hardware fatigue. All the data on the disk is redundant; however, in this situation, you cannot interrupt I/O.
How should you resolve this error?

Question32: You are turning on the quota on a file system for the first time. You want to ensure you are able to establish quota for a group of users named finance.
What should you do?

Question33: You need to create a new volume that bears the failure of one enclosure and provides greater reliability. To meet the required goal, you type the following command on the command line:
vxassist -g diskgroup -P storagepool make strpvol 2g layout=mirror \ nmir=2 mirror=enclosure options What should be the expected outcome of this command?

Question34: You are responsible for administering the Storage Foundation for Oracle server. You plan to clone a database using Database FlashSnap. When you run the dbed_vmchecksnap command you get an error
"SFORA dbed_vmchecksnap ERROR V-81-5677 Could not find a mandatory, primary and valid archive destination for database PROD." You want to resolve this error.
What should you do?

Question35: Which is a limitation of using CDS disk layout under VxVM 4.0 or above?

Question36: You want to use the VxSE rule to detect whether a physical disk has too many RAID-5 logs. Before you execute the VxSE rule, you want to acquire complete information about the rule.
How would you search for the VxSE rule that informs you whether a physical disk has too many RAID-5 logs on it?

Question37: Refer to the exhibit.

Symantec Data Loss Prevention's four phases of risk reduction model provides a blueprint for identifying and remediating key risk areas without disrupting legitimate business activity.
According to this model, which activity should occur during the baseline phase?

Question38: What is the most efficient method for designing filters to remove unwanted traffic?

Question39: After installing Veritas Volume Manager for your large number of volumes, you will configure the volumes as per your requirement. But you find the performance is very slow. You need to reconfigure the volumes to achieve significant improvement in performance when there are multiple I/O streams.
What should you do?

Question40: You administer storage for multiple hosts supporting a large OLTP application. Host Mkt operates both within the secure intranet, and host Store operates in a DMZ environment. Store stages detailed transaction logs on a volume named s_detail in a disk group named s_data. You need to deliver large batches of transaction data history from host Store to host Mkt for market analysis, and to receive the results of that analysis, as part of a weekly routine.
To deliver sales history to the marketing host, what sequence of actions must you carry out? Place the following actions in order.
1. Use vxdg to deport the snapshot volume's disk group from host Store. 2. Use vxdg to import the snapshot volume into host Mkt. 3. Use vxsnap to create a snapshot of s_detail on s_data. 4. Use the vxsnap command to enable FastResync on s_detail. 5. Use vxdg to split the snapshot volume away from s_data, into a separate disk group.

Question41: While working under VxVM control, you discover that the vxplex command has failed because a previously attached plex did not complete. You get the following error messagE. "VxVM vxplex ERROR V-5-1-809 Plex plex1 in volume volume1 is locked by another utility." You must resolve this error with minimum administrative effort.
How should you resolve this error?

Question42: There are four volumes that are striped across five disks. One of the disks fails.
From how many volumes will you restore the data?

Question43: You are working on a Storage Foundation 5.0 server named Srv1 that has a disk group named vol1. You install another Storage Foundation 5.0 server named Srv2. You want to successfully move the disk group from Srv1 to Srv2. To initiate the movement, you stop all volumes in the disk group, and deport and move all disks to Srv2.
What should you do next?

Question44: Which DLP Agent task is unique to the Symantec Management Platform and is unavailable through the Enforce console?

Question45: You are consulted by a development environment administrator about a test server with Storage Foundation installed. The development administrator is facing difficulty in making changes to a complex configuration. You are required to identify the problem with the process of changing the existing configuration. What would you do to perform this task?

Question46: While working under VxVM control, you execute a command:vxassist -g hrdg mirror payvol hrdg03 What will be the expected result of this command?

Question47: While you are working on Storage Foundation for DB2, you want to convert the DB2 containers by executing the qio_convertdbfiles -u command.
What will be the outcome of the command?

Question48: You have executed the vxdg -g diskgroup adddisk disk_name= command.
Which switch needs to be added to force VxVM to take the disk media name of the failed disk and assign it to the new replacement disk?

Question49: Which command is used to save queries/commands written to the database when one of the following DMLs is used: Update, Insert, or Delete?

Question50: A network architect needs to install Symantec Data Loss Prevention detection servers in a hosted environment.
Which action should the network architect take to ensure secured communication between the detection server and the Enforce server?

Question51: You have installed Storage Foundation 5.0 on the Unix platform and need to add licenses. You want to ensure that the licenses are correctly installed on the system.
What should you do?

Question52: Consider a situation where you run the vxdmpadm start restore command and encounter an error message "VxVM vxdmpadm ERROR V-5-1-3243 The VxVM restore daemon is already running" How will you solve this error?

Question53: Which action is available for use in Smart Response rules and Automated Response rules?

Question54: An I/O error has corrupted multiple plexes of a mirrored volume and has not left any plex CLEAN or ACTIVE. You are required to mark one of the plexes CLEAN and point the system to use that plex as the source for reviving the other plexes.
How should you resolve this error?

Question55: While working under VxVM control, you get an error message "VxVM vxassist ERROR V-5-1-2935 No more space in disk group configuration." This message indicates that there is no more space in the disk group configuration database for VxVM object records.
How should you resolve this error?

Question56: You are creating a volume and need the storage allocated in:
1. Concatenated disks
2. Form columns
3. Form mirrors
You want to specify the space allocation across multiple volumes.
What should you do?

Question57: You were running Storage Foundation 5.0 on an evaluation license. Two days back, the evaluation license expired. You want to retain the configuration of the existing system. You want a solution that requires minimum administrative effort.
What should you do?

Question58: You work in a Server Operations Center (SOC) with other administrators monitoring VxVM background tasks after you initiate them. You need to set up a VxVM task so that these SOC administrators can track your background tasks against the change control documentation.
What would you do address this requirement?

Question59: An administrator needs to remove an agent and its associated events from a specific Endpoint Server.
Which Agent Task does the administrator need to perform to disable its visibility in the Enforce UI?

Question60: The vxprint command output for volume vol07 indicates that it has three plexes.
How will you determine which plexes are used for data?

Question61: You are working on Storage foundation for DB2. You create a file system and you want to mount the file system to enable a Quick I/O. However, you are not able to mount the file system.
What could be a probable cause? (Each correct answer presents part of the solution. Select two.)

Question62: What is the most efficient policy so that incidents are generated only when a specific user under investigation sends encrypted files?

Question63: How does VxFS allocate storage in the storage array?

Question64: In System Overview, the status of a detection server is shown as 'unknown'. Examination of the detection server reveals all Vontu services are running.
Which port is blocked and causing the server to be in the 'unknown' state?

Question65: An administrator is attempting to uninstall a version 11.6 DLP Agent, but the uninstall password fails to remove the agent. The group who set the initial password is unavailable.
Which two options are available to address the password issue? (Select two.)

Question66: You are required to change a volume named vol1 in disk group mydg1 from a RAID-5 volume layout to a mirror-stripe (RAID 0+1) volume layout. You want to follow the correct procedure to change the volume layout. Which sequence of commands would you follow to achieve this goal?

Question67: You work in a Server Operations Center (SOC), and you are required to track the status of the VxVM tasks in progress on a UNIX server. Another member of the administration team is scheduled to execute VxVM changes; you are also responsible for tracking the progress of those changes. In addition, you are required to escalate any issues with the change to the team member.
How would you execute this task?

Question68: You have planned to implement Storage Foundation Basic in pre-production environment. You identify a server that has the following configuration: Operating System: SUSE Linux Enterprise Server 9 with SP3.
Number of CPUs: 4. Memory: 1 Gigabyte. Disk SpacE. 40 GB with 25 GB free. When you begin the installation, it fails with an error.
What could be a probable cause?

Question69: While deporting a disk group under the VxVM control, the disk group fails.
What could be the possible reason for the disk group failure?

Question70: How would you define virtual storage?

Question71: A DLP administrator is testing Web Prevent functionality. When the administrator posts a small test file to a cloud storage website, a new incident fails to appear.
What should the administrator do to allow incidents to be generated against this file?

Question72: Which two locations can the administrator verify a newly created policy was loaded on a detection server?
(Select two.)

Question73: You want to allow non-layered volume to change to layered stripe-mirror volume while remaining online.
What is the correct procedure to perform this conversion?

Question74: You are managing a Storage Foundation 5.0 using Storage Foundation Management Server on Solaris 10.
You need to manage hosts with different domain names from the Storage Foundation Management Server. What should you do?

Question75: Which two restrictions does relayout place on the administration of a volume while it is in progress? (Select two.)

Question76: A compliance officer needs to understand how the company is complying with its data security policies over time. Which report should the compliance officer generate to obtain the compliance information?

Question77: Which interface provides single sign-on access for the purpose of administering Data Loss Prevention servers, managing policies, and remediating incidents?

Question78: A network administrator needs to be notified if someone attempts to tamper with or shut down the VPN connection on an iPad or iPhone. Which product should the administrator use to configure the notification alert?

Question79: When working on Storage Foundation 5.0 on HP-UX, you are unable to log in to Veritas Enterprise Administrator. You have converted shadow passwords with long passwords. After converting to shadow password with long password, the users are unable to log into Veritas Enterprise Administrator. You check and ensure that the users are part of the vrtsadm group. Error" V-39-53247-3 Error while connecting to Server. The user name or password is incorrect. Please retype your user name and password, and try connecting to the server again." You want to ensure all users who are part of the vrtsadm group are able to log on to the Veritas Enterprise Administrator.
What should you do?

Question80: You are the administrator for the Veritas Volume Manger. You notice that the size of the disk group's configuration database in its private region is nearly full. You want to ensure that you do not loose any data from the disk group and are able to preserve the volume state.
What should you do?

Question81: You want to install the Veritas Enterprise Administrator to manage the Veritas Storage Foundation 5.0 server installed. Before installing the Veritas Enterprise Administrator, you need to know the installation procedure. Given the following installation procedures:
1. Start the Veritas Enterprise Administrator Server on the system to be administered. 2. Start the Veritas Enterprise Administrator Client. 3. Install the Veritas Volume Manager on the system to be administered. 4.
Install the Veritas Enterprise Administrator server and client on the system to be administered.
What is the correct order of steps that you need to follow?

Question82: You have just started a relayout operation in a live test environment, and you want to limit the impact of your work on concurrent testing activities. You also want to accommodate the need to constrain a relayout job's performance impact on concurrent activities.
What would you do to perform this task?

Question83: You are planning to install Storage Foundation 5.0 server. You need at least 70% percent of physical I/O operations to be read operations.
What type of volume should you choose to ensure that you have optimum performance improvement?

Question84: You are performing a move operation under VxVM control. You cannot find the disk involved in a disk group. In addition, you get the following error message:
"VxVM vxconfigd ERROR V-5-1-4551 dg_move_recover: can't locate disk(s), giving up" How should you resolve this error?

Question85: A software company needs to protect its source code including new source code between indexing times.
Which detection method should the company use to meet this requirement?

Question86: Which command will you run to get the full path name of the file, if you only have the inode number?

Question87: You have already removed a mirror from volume using vxassist command. After removing a mirror you will be left with only one mirror. However, you need to have at least two mirrors on a volume. What should you do to resolve this situation?

Question88: You place six physical disks under Volume Manager control to create 10GB of volume. You want to use this volume as an archive directory. You need to create a volume that will store three copies of the archived data. Which command will you use to create a volume with three plexes?

Question89: You need to create a storage checkpoint that contains file system metadata and data blocks. You want to ensure that the storage checkpoint that you create can be mounted, accessed, and written in Veritas File System. The storage checkpoint that you create must represent an image of the active file system.
Which type of storage checkpoint should you create to meet this goal?

Question90: While replacing a disk containing a plex's subdisk, you discover that the contents of the plex are out-of- date with respect to the volume.
What will be the state of the plex?

Question91: You execute the vxtrace command without any option to collect I/O trace data on all virtual disk drives during peak I/O operations. When you start to analyze the data, you notice that vxtrace displays a record indicating records are lost. You want to reduce the likelihood of the kernel discarding records so that you don't have to rerun vxtrace to capture the records.
What should you do?

Question92: Which valid automated response option should an administrator choose for Email Prevent?

Question93: An Oracle Enterprise database is having I/O performance issues. You need to determine the exact location of a data block on a disk that is a hot spot slowing down I/O performance.
Which feature of Storage Foundation 5.0 for Oracle will you use to perform this task?

Question94: Refer to the exhibit.

An administrator needs to implement a Mobile Email Monitor solution to inspect corporate emails on mobile devices. Where should the administrator place the web proxy?

Question95: While working with Veritas Storage Foundation for Oracle, you execute the command set #vxtunefs -s -o qui_cache_enable=1 /db01.
What will be the output of this command?

Question96: You have designed a tiered storage environment using ISP volumes, created the disk group that will be used to hold the tiered volumes, and created the storage pool in the disk group. You are now ready to install the template definition file in the ISP configuration database that you have created. What should you do next?

Question97: The DLP services on an Endpoint Server keep stopping. The only events displayed in the Enforce UI are that the server processes have stopped. What is the first step the administrator should take to keep the services on the Endpoint server running?

Question98: On your Storage Foundation 5.0 server, a mirror volume is no longer needed. You need to disassociate and remove a mirror named, vol01-02 from the disk group so that you can free up disk space. How will you accomplish this?

Question99: A file system encounters an error during VxVM operations. The error "VxVM vxio WARMINIG V-5-0-144 Double failure condition detected on RAID-5 volume" is displayed in the file system. How should you resolve this error?

Question100: You have installed and configured Veritas Volume Manager on a UNIX server. You want to install and configure Veritas Enterprise Administrator (VEA) server to manage the VEA agents that you will be installing on Windows and UNIX client computers. You want to ensure you are able to successfully install VEA server. What should you do?

Question101: Refer to the exhibit.

An administrator is testing the DLP installation by placing .EML files into the drop folder, but has been unsuccessful in generating any incidents. The administrator is checking the Advanced Server Settings page to see if it can help diagnose the issue.
What could be causing this problem?

Question102: A Network Monitor server has been installed and the networking components configured accordingly. The server is receiving traffic, but fails to detect incidents. Running Wireshark indicates that the desired traffic is reaching the detection server.
What is the most likely cause for this behavior?

Question103: While performing a disk group joins operation, you get an error "VxVM vxdg ERROR V-5-1-2866 object:
Record already exists in disk group." You want to resolve this error.
How should you resolve this error?

Question104: While working with volume under VxVM control, you discover that a subdisk is detached from a RAID-5 volume. Because of the failure of the disk or an uncorrectable error on the disk, you get the following error messagE. "VxVM vxio WARNING V-5-0-237 object subdisk detached from RAID-5 volume at column column offset offset"
How should you resolve this error?

Question105: You have a Storage Foundation 5.0 server with a number of mirrored volumes. You need to appropriately utilize the free space on the mirrored volumes.
What should you do?

Question106: A policy template called Customer Credit Card Numbers is being imported into the system.
What is the default result for this action?

Question107: You move a set of files from a VxFS file system to another file system. When the files are moved, the extent attributes are not moved along with the files and are lost during the migration.
What could be a possible cause for this problem?

Question108: You are managing Veritas Storage Foundation for Oracle. You need to pre-allocate space for a database file named db_data. To do this, you first create a db_data file on a mounted point. Next, you execute the command setext -r size -f noreserve -f chgsize \ .filename with respective attributes. What should you do next?

Question109: A company needs to secure the content of all Mergers and Acquisitions Agreements. However, the standard text included in all company literature needs to be excluded.
How should the company ensure that this standard text is excluded from detection?

Question110: A DLP administrator needs to stop the PacketCapture process on a detection server. Upon inspection of the Server Detail page, the administrator discovers that all processes are missing from the display. Why are the processes missing from the Server Detail page display?

Question111: You have to recommend appropriate virtual storage configurations for use by specific classes of applications, based on the details of each application's I/O requirements.
Your application generates large volumes of temporary data. The RAID configuration for temporary space should aim to maximize I/O throughput. You also need to ensure that there is no unnecessary space overhead. Which RAID layout should you use?

Question112: You need to mirror an existing volume named mirvol1. You need to achieve the following goals:
Mirror mirvol1: Should be a single mirror to the existing volume using disk mydg01: Synchronization must take place in the background: To meet the required goal, you execute the following command:
vxassist -g mydg -b make mirror mirvol1 \ use_storage=' "DM"="mydg01"
Which of the defined goals have been met?

Question113: While accessing a node in the Dynamic Multipathing (DMP) database you get an error "VxVM vxdmp NOTICE V-5-0-111 disabled dmpnode dmpnode_device_number".
How will you resolve this error? (Each correct answer presents part of the solution. Select two.)

Question114: Refer to the exhibit.

Symantec Data Loss Prevention's four phases of risk reduction model provides a blueprint for identifying and remediating key risk areas without disrupting legitimate business activity.
What occurs during the notification phase?

Question115: What is the correct traffic flow for the Symantec Data Loss Prevention for Mobile Prevent?

Question116: While monitoring the Storage Foundation 5.0 environment in your organization, you get a kernel message specifying a disk failure.
In which order would you perform the actions below to resolve this error?
1. Confirm that the problem is caused by a disk failure.
2. Unmount the file system and use fsck to run a full structural check.
3. Check the console log for I/O erros.
4. Replace the disk before the file system is mounted for write access.

Question117: You have just performed maintenance operation on a system where VxVM is installed. When you start the system you realize that some disks have entered the FAILED state. After the inspection of the system, you discover that a cable is unplugged. You reconnect the cable. However, after reconnecting the cable, you need to move these disks out of the FAILED state.
How should you resolve this error?

Question118: An incident response team has determined that multiple incidents are resulting from the same user action of copying sensitive data to USB devices.
Which action should the incident response team take to fix this issue so only one incident per action is detected?

Question119: You have installed Storage Foundation 5.0 Standard server with a number of hosts. You want to centrally monitor and manage the hosts. You also want to generate reports for the hosts and the storage resources that the hosts consume.
What should you do?

Question120: You are using the Symantec Storage Foundation Web GUI to manage a tiered storage environment. The Storage Foundation Web GUI provides a mechanism that allows an improved level of data management over mechanisms.
What is this mechanism?

Question121: You administer a server that needs to support a large (~1 TB) end-user VxFS file system. The users request file restorations from backup several times per week. The amount of space required for a full-size copy of the file system's data is more than you have available.
What type of Storage Foundation object would be best suited to support this requirement for an undelete capability?

Question122: You have imported a disk group onto a new Storage Foundation 5.0 server named Srv1. The existing Storage Foundation 4.1 server named Srv1 will be decommissioned. When you attempt to use the newly imported disk group on Srv2, you get the following error: VxVM vxedit ERROR V-5-1-2829 Disk group version doesn't support feature. You want to resolve this error and use the features provided by VxVM running on Srv2.
How would you solve this error?

Question123: You are auditing a current storage environment that is utilizing storage tiering. Based on the collected information from the audit, you want to define a policy to take into account that enterprise accounting, security, and regulatory compliance for specific set of files.
Which policy factor should you use for the above scenario?

Question124: A divisional executive requests a report of all incidents generated by a particular region and summarized by department. Which incident information must be populated to generate this report?

Question125: What is the main difference between data loss prevention and other security technologies?

Question126: The administrator determines that \SymantecDLP\Protect\Incidents folder on Enforce contains .BAD files dated today while other .IDC files are flowing in and out of the \Incidents directory. Only .IDC files larger than 1MB are turning to .BAD.
What could be causing only incident data smaller than 1MB to persist while incidents that are larger than
1MB change to .BAD files?

Question127: You administer the Storage Foundation 5.0 environment in your organization. A particular file system displays some odd I/O characteristics. Before you proceed, you decide to take a look at the current I/O parameters. Which command will you use to print the current values of the I/O parameters?

Question128: You are working on Veritas Volume Manager. You need to create volume layout from multiple regions of one or more disks, if there is not enough space available for entire volume on a single region of a disk. You want to ensure that the volume that you create provides the flexibility to extend the volume to another disk.
What should you do?

Question129: Which object is used to initialize a file system for application use?

Question130: When attempting to log in as administrator to the UI, the administrator receives a login error:
Invalid Username/Password or Disabled Account
The DBA verifies the account is enabled. The information provided for the environment only includes the DLP protect database username and password as well as a username and password called Sys Admin
\Admin.
How should the administrator change the built-in 'Administrator' password?

Question131: When you are working on Veritas Storage Foundation for Oracle, the vxdbd daemon reports an error:
"VXDBA_PRODUCT exec_remote ERROR V-81-7700 Can not connect to the vxdbd". You must resolve this error with minimum administrative effort.
What should you do? (Each correct answer presents part of the solution. Select two.)

Question132: How is data moved to the servers at Symantec when auto-transmission of Supportability Telemetry data is enabled?

Question133: A Network Monitor is showing under System Overview as 'Running Selected'. The corresponding detection server events indicate that packet capture and filereader are crashing.
What is a possible cause for the Network Monitor being in this state?

Question134: Refer to the exhibit.

An administrator needs to implement the use of a scanner, but is unfamiliar with the general, high-level process associated with scanners. Which action occurs in step 3?

Question135: You want to implement Storage Foundation Enterprise in your storage environment. You want to ensure you have at least 5 GB of free space after the Storage Foundation 5.0 has been installed on your computer. You are installing Storage Foundation on the same drive where the operating system has been installed.
What should be the size of the system drive to meet the requirement?

Question136: Which option describes the three-tier installation type for Symantec Data Loss Prevention?

Question137: You are working on Veritas Storage Foundation for Oracle RAC and want to create a disk group on the shared disks. You execute the command vxdctl -c mode on a node.
What will be the output of this command?

Question138: A DLP administrator needs to configure an Automated Response rule that can execute while end-users are off the corporate network. Which response rule condition will enable the administrator to accomplish this task?

Question139: You need to create a traditional third-mirror breakoff snapshot in disk group "testdg" on a volume named
"testvol". You've used the vxassist command to start the creation of the snapshot, synchronizing in the background.
How do you determine whether the snapshot is ready?

Question140: Which command will you use to display all the disk groups that are currently imported on the system?

Question141: Which product can replace a confidential document residing on a share with a marker file explaining why the document was removed?

Question142: Which System Administration page will display a list of the system servers as well as recent error-level and warning-level system events?

Question143: You are administering the Veritas Volume Manager. While working on the Veritas Volume Manager, you execute the vxprint -hvt command.
What will be the outcome of the command?

Question144: While working on the Storage Foundation 5.0 server, you execute the following commanD. fsckptadm -n create sat_8pm /mnt0
What is the expected outcome of this command?

Question145: You are installing the Storage Foundation Management Server 1.0 in Storage Foundation 5.0 Environment. What resource you require before installing?

Question146: How does a volume created by VxVM appear in the operating system?

Question147: While working under Veritas Volume Manager, you want to put a disk under the Veritas Volume Manager control. You execute the command vxdiskadd c0t1d0.
What is the result of this command?

Question148: You need to create a new mirrored-striped volume. You type the following command:
vxassist -g diskgroup -P storagepool make strpvol 2g \ layout=mirror-stripe ncols=8 mirror=controller options
Which type of volume will be created?

Question149: You are not able to find a physical device corresponding to the disk ID in the disk media record when one of the subdisks associated with the plex fails. You need to check the plex state to solve the problem. What will be the status of the plex in this situation?

Question150: An administrator is applying a newly created agent configuration to an Endpoint server. Upon inspection, the new configuration is unassigned in the Endpoint Server Details.
What is a possible cause for the new configuration failing to be assigned?

Question151: You are the administrator for Veritas Volume Manager. You are resizing a device by reducing the size of the device, which has a volume configured on it. However, when you attempt to reduce the size, the resize operation fails. You want to ensure you are able to reduce the size of the device. What should you do?
(Each correct answer presents a unique solution.)(Select two.)

Question152: An administrator is configuring an approved Endpoint device and adding it as an exception to a policy that blocks the transfer of sensitive data. Data transfers to these approved Endpoint devices are still being blocked. Which action should the administrator take to prevent the data transfers from being blocked?

Question153: You are monitoring I/O on a volume that is under Veritas Volume Manager control using the vxstat command. You need to measure the impact of a specific write operation on a volume. You want to ensure you are successfully able to measure the impact.
What should you do?

Question154: You are administering a Storage Foundation 5.0 server. You need to create a new mirrored-striped volume using the command line. What should you do?

Question155: Which two pieces of system information are collected by Symantec Data Loss Prevention Supportability Telemetry? (Select two.)

Question156: You have a system that has two disks-disk01 and disk02, which are mapped into the system configuration during boot as disks c0t0d0s2 and c0t1d0s2, respectively. A failure has caused disk01 to become detached. What would you do to view the status of the failed disk01?

Question157: What causes the majority of data loss prevention violations?

Question158: You have large number of mirrored volumes, and the resynchronization process on mirrored volumes will take lot of time. You want to address enable Dirty Region Logging (DRL) and find out the cause why it takes a long time for resynchronization. You want to check the status of DRL logging to see if it is already enabled.
How will you accomplish this task?

Question159: Which endpoint database file should be used to tune and change debugging levels?

Question160: Which function does the Email Prevent server provide when integrating into an existing email environment?

Question161: An administrator running a company's first Discover scan needs to minimize network load. The duration of the scan is unimportant. Which method should the administrator use to run the Discover scan?

Question162: An incident responder can see basic incident data, but is unable to view specific details of the incident.
What could be wrong with the configuration in the incident responder's role?

Question163: While troubleshooting the Storage Foundation 5.0 environment in your organization, you discover that a disk group is disabled. You need to run the vxconfigrestore command to restore the disk group.
In this situation, which switch will you use to perform a precommit analysis of the state of the disk group configuration?

Question164: You are administering the Volume Manager in Cluster environment in the datacenter showing a type of write failure on a slave node. You are not able to view the write failure occurred to other nodes in the cluster.
What will be the cluster behavior under the local disk detach policy? (Each correct answer presents part of the solution.) (Select two.)

Question165: A DLP administrator has determined that a Network Discover server is unable to scan a remote file server.
Which action should the administrator take to successfully scan the remote file server?

Question166: You have a nonredundant concatenated volume named datavol in a disk group named datadg. The volume has a file system on it. One of the underlying disks of the volume called datadg02 fails temporarily due to a power failure. You fix the problem of the power failure, and ensure that the disk is powered back again. You ensure that both the system and VxVM can see the disk again. Then, you reattach the disk back to the disk media record.
Which command will you execute next to be able to run fsck on the file system?

Question167: Which detection server requires two physical network interface cards?

Question168: Which two methods should an administrator use to exclude emails going to partner.com and all traffic going to a specific subnet? (Select two.)

Question169: You want to rename a boot disk group because it contains volumes that are in use by mounted file systems. Before you rename, you want to unencapsulate the root disk.
Which command is used to unencapsulate the root disk?

Question170: You are responsible for managing and monitoring the Storage Foundation 5.0 environment in your organization. You notice that VxFS is not performing at an optimal level. You decide to run the fsadm utility.
How will the fsadm utility help you resolve this problem?

Question171: A DLP administrator needs to decide if using Symantec Management Console (SMC) will provide additional functionality over the built-in Agent Actions that can be performed via Agents > Overview > Summary Reports.
What are two of the Agent Actions that can be performed with SMC that are unable to be used with the built-in Agent Actions? (Select two.)

Question172: You have collected performance data from an e-commerce Oracle database using the vxstat command.
You are creating a similar e-commerce Oracle database to serve as a backend for an e-commerce website. You also want to ensure optimal Online Transaction Processing (OLTP) throughput by balancing the I/O across as many disks as possible.
What should you do?

Question173: You are responsible for managing two Storage Foundation 5.0 servers, Srv1 and Srv2. You want to permanently move a disk group from Srv1 to Srv2. However, the Srv2 already has a disk group with the same name. You need to move the disk group without making modifications to the data on the disks. You also need to ensure that the disk group import is permanent on Srv2.
What should you do?

Question174: While performing disk operation under Volume Manager Control, you will execute the command vxassist -g mktdg make mktvol 10g.
What will be the output of this command?

Question175: A DLP administrator needs to modify a Network Discover scan that has started.
How should the administrator ignore files larger than 20 MB for the remaining shares?

Question176: Ten test agents are being deployed that use an uninstall password required to uninstall the DLP Agent.
The agents deploy and install correctly. Upon testing to remove the Agent, the uninstall password fails to work. The deployment team used 'Symantec' for the UninstallPasswordKey.
Why does the uninstall fail when using the same password?

Question177: Which option should be used to optimize the performance of a network share Discover scan?

Question178: Which version of Oracle does Symantec Data Loss Prevention version 12.0 require for new installations or upgrading from 11.x to 12.0?

Question179: You have encapsulated the disk for swap partitions and created mirrors under the VxVM control.
Which files in /etc get modified when the root disk is encapsulated?

Question180: Consider a situation where a system has a volume with the traditional mirror-stripe layout that consists of four disks. The volume consists of: Subdisk1 and Subdisk2, which are in Plex1 and Subdisk3 and Subdisk4, which are in Plex2. What is the volume status if both Subdisk1 and Subdisk4 fail?

Question181: A DLP administrator needs to forward data loss incidents to the company's Security Information and Event Management (SIEM) system. Which response rule action provides the administrator with the ability to accomplish this task?

Question182: Which command attempts to find the name of the drive in the private region and to match it to a disk media record that is missing a disk access record?

Question183: You are attempting to install Storage Foundation 5.0 on a server that has SUSE Linux Enterprise Server
9.0 installed on it. When you initiate the installation, it fails. You must ensure that installing Storage Foundation 5.0 has minimum impact on the server.
What should you do to install Storage Foundation 5.0 on the server?

Question184: An organization needs to determine whether at least 50% of a sensitive document is being sent outside the organization. Which action should the company take to accomplish this?

Question185: Which automated response action can be performed for data loss incidents caused by confidential data found on Windows shares?

Question186: How does the DLP Agent prevent slow response time?

Question187: How should an administrator apply a policy to Network Discover scans?

Question188: A volume called datavol in the disk group named datadg has two plexes. The plexes are named P1 and P2. Due to a series of failures, the P1 plex ends up in DISABLED/RECOVER state, and the P2 plex ends up in DISABLED/STALE state. As the administrator, you are aware of the series of failures, and you know that the data on the P1 plex is still valid and has the most recent copy of your data. You want to recover the plexes.
Which command will you execute to recover the plexes?

Question189: You are administering the Storage Foundation 5.0 environment in your organization. Some of the volumes are showing sluggish performance. Tuning the file change using vxtunefs can correct the problem.
What are File Change Log tunable parameters for vxtunefs? (Each correct answer presents part of the solution.)(Select two.)

Question190: When you attempt to access Quick I/O files with vxfddstat application on Veritas Storage Foundation for Oracle, you get an error: Running vxfddstat or qiostat on a Quick I/O file will return "Cannot open file ".
How should you resolve this error?

Question191: Which two protocols are available by default and recognized by Network Monitor based on their individual signatures? (Select two.)

Question192: What is the correct ratio between sub volumes and a volume that will be used as a disk drive?

Question193: You are responsible for managing Veritas Storage Foundation for Oracle. While working on the Veritas Storage Foundation for Oracle with Quick I/O feature, you execute the command #mount -F vxfs -o noqio / dev/vx/dsk/testdg/testvol1 /testvol1.
What would be the expected outcome for this command?

Question194: Which incidents appear in the Network Incident List report when the Network Prevent Action filter is set to Modified?

Question195: What is the correct configuration for BoxMonitor.Channels that will allow the server to start as a Network Monitor server?

Question196: A DLP administrator is writing one policy to block sensitive data from being copied to removable media.
The administrator is applying two response rules to the policy: 'Endpoint Prevent: Notify' and 'Endpoint Prevent: Block'.
Why are some copies blocked while others are only notified?

Question197: Which two components can perform a scan of a workstation? (Select two.)

Question198: You have Storage Foundation 5.0 installed on Solaris 10. When managing Storage Foundation 5.0 from Storage Foundation Management server, you get an error "The action agent has stopped running. Rule manager is no longer available." You need to resolve this error immediately.
What should you do?

Question199: You have replaced disks on a system under the VxVM control and you get an error "VxVM vxconfigrestore ERROR V-5-1-6012 There are two backups that have the same disk group name with different disk group id". How will you resolve this error?

Question200: You are administering Veritas Volume Manager on the UNIX platform, and you need to remove the volume using vxassist command. Given the following steps:
1. Remove the volume entry from the /etc/vfstab file.
2. Remove all references to the volume by application programs.
3. Stop all Activity by VxVM on the volume using vxvol stop command.
4. Unmount the volume, which is mounted as a file system.
What are the necessary sequential steps you need to follow before removing the volume?

Question201: A user is unable to log in as sysadmin. The Data Loss Prevention system is configured to use Active Directory authentication. The user is a member of two roles: sysadmin and remediator.
How should the user log in to the user interface in the sysadmin role?

Question202: You are writing the change documents for a procedure to relay a volume.
In which two cases is it necessary to specify a target plex for the "vxassist relayout" operation? (Each correct answer presents part of the solution. Select two.)

Question203: An information security officer has detected an unauthorized tool on desktops being used to transmit data with encrypted communications.
Which Symantec Data Loss Prevention feature should the information security officer use to prevent this tool from accessing confidential data?

Question204: You are responsible for administering a server with mirrored volume layouts. You noticed that the last time the server was down, the server took longer than usual to resynchronize the mirrors. You want to make configuration changes on the server to reduce resynchronization time.
Which actions will you perform?

Question205: You were working with Veritas Volume Manager and the Volume Manager failed due to disk failure. You are required to recover the Veritas Volume Manager Configuration.
Identify the correct sequence of actions that you would perform in this situation.
1. Reinstall the operating system
2. Replace the failed disk
3. Recover the VxVM configuration
4. Add the Volume Manager Packages
5. Startup Hot-relocation 6. Clean up the system configuration

Question206: A company needs to implement Data Owner Exception so that incidents are avoided when employees send or receive their own personal information.
Which underlying technology should the company use?

Question207: The datavol volume is in the datadg disk group. A VxFS file system is mounted on the datavol volume. You need to increase the length of a datavol volume because it is not large enough for the amount of data to be stored on it.
Which statement is correct for this situation?

Question208: When you attempt to start the RAID-5 volume, you are prompted with an error message "VxVM ERROR V-
5-1-1237 Volume r5vol is not startable; some subdisks are unusable and the parity is stale." You want to remove this error and start the RAID-5 volume.
How will you ensure that you do not encounter this error again?

Question209: After you install Veritas Enterprise Administrator to manage Storage Foundation 5.0, you attempt to start the Veritas Enterprise Administrator, but are prompted with an error "Veritas VM Storage Administrator Server Terminated. Stopping Veritas VM Storage Administrator Server ### Terminated." How do you solve this problem?

Question210: You administer storage for an application "myapp" on server QA1, with a file system dedicated to code and configuration data for that myapp. Part of the testing discipline is to return myapp's file system to a known initial state prior to each test activity, and to run a series of tests beginning with the same initial state. The traditional approach to preparing for each test involves restoring the file system from a backup image prior to each test, which imposes an hour's delay between the end of one test run and the beginning of the next.
A typical testing session lasts only two to three hours, the hour of restore delay between tests reduces the availability of the server for testing by about 30%.
What kind of Storage Foundation mechanism would work best to reduce the delay required between tests?

Question211: An organization needs to implement a solution that will protect its sensitive information while allowing its mobile device users to access sites and applications such as Facebook, Dropbox, and Twitter.
Which Symantec Data Loss Prevention solution should the organization use to protect its information?

Question212: Which two products are leveraged for Network Prevent integration? (Select two.)

Question213: You have just started a relayout job on a large volume, and your work is interrupted by an unrelated server outage. Site policy requires that the relayout should be completed or rolled back within its scheduled window. You want to stop the relayout and roll back the incomplete changes so that the VxVM configuration is left stable till the relayout can be rescheduled.
What would you do to perform this task?

Question214: You are monitoring the storage environment in the Datacenter. You want to track changes to files and directories. These files and directories are used by backup utilities and replication programs. In which location will you find the log that tracks these changes to the files and directories?

Question215: As the storage administrator for a large multifaceted environment, you are faced with the challenge to support the growth of the environment's capacity and to manage the budget for that growth. The company's management requires you to limit the growth of expenses, even at the cost of using slower storage configurations. On the other hand, the application administrators demand maximum performance.
How can you resolve this conflict?

Question216: You want to preserve data on existing slices on the disk and want to put this disk under Volume Manager control without loosing any data. How will you preserve the data?

Question217: A DLP administrator is creating a role that contains an incident access condition that restricts users from viewing specific incidents.
Which two conditions can the administrator specify when creating the incident access condition in a role?
(Select two.)

Question218: You have installed Storage Foundation for DB2. You need to create a multi-mirror snapshot. When you attempt to add the second mirror and the data change object (DCO) log, db2ed_vmchecksnap fails.
What could be the probable cause?

Question219: How should an administrator determine which Database version is running?

Question220: A DLP administrator is attempting to use Encryption Insight to detect confidential information in encrypted files but has been unsuccessful. It is determined that the process was unable to retrieve the appropriate PGP key because the user key was using the incorrect encryption mode.
What is the correct encryption mode that must be used by the user key?

Question221: You are auditing a current storage environment that is utilizing storage tiering. You will use the information gained from the audit in setting up policies for this tiered storage environment. When assigning the policy, you want to take into account applications that run concurrently that compete for I/O resources when data is placed on separate storage devices with separate access paths. Which policy factor should you use for the above scenario?

Question222: An administrator pulls the Services and Operation logs off of a DLP Agent by using the Pull Logs action.
What happens to the log files after the administrator performs the Pull Logs action?

Question223: You have installed the Veritas Enterprise Administrator to manage Storage Foundation 5.0. You want to manage the Veritas Enterprise Administrator from remote system using the Graphical User Interface (GUI).
What services must be running on the remote system? (Select two.)

Question224: ou have gathered file I/O performance data from an Oracle Enterprise database. The database is using one filesystem on a striped volume. You want to use the performance data to adjust the system configuration to ensure efficient use of system resources.
Which specific activity should you should perform to adjust the system configuration?

Question225: You are responsible for administering a large storage environment. The environment includes DBMS systems that use VxFS-based data files, performance-critical application files, and archives of historical user data. Users and application administrators are not satisfied with policies segregating their data files into different file systems in terms of these usages, and they want you to manage these issues for them.
How does DST help in this case? (Select two.)

Question226: What is the minimum number of plexes required for true mirroring to provide redundancy of data?

Question227: Which object is used as a building block for a plex?

Question228: An incident responder needs to change the status of an incident to 'Escalate and Notify'.
Which two places in the user interface can this Smart Response rule be invoked? (Select two.)

Question229: How do you change the time limit for an I/O request in Dynamic Multi-Pathing (DMP) in Veritas Volume Manager on a Solaris operating system?

Question230: Which rule will you use to discover disabled controllers failures in the Storage Foundation 5.0 environment?

Question231: You are responsible for administering the Storage Foundation for Sybase server. You want to remove a mounted volume. What should you do first to ensure you are able to remove the mounted volume?

Question232: A divisional executive requests a report of all incidents generated by a particular region, summarized by department. What must be populated to generate this report?

Question233: You're the administrator of a large storage environment. The environment includes DBMS systems that use VxFS-based data files, performance-critical application files, and archives of historical user data.
You have made a recommendation to adopt the Dynamic Storage Tiering (DST) capability, and you've been asked to summarize the differences between DST and standard volumes and file systems. What are the components of DST that distinguish it from standard mechanisms? (Select two)

Question234: Which is the correct installation sequence?

Question235: An incident responder is viewing a discover incident snapshot and needs to determine which information to provide to the next level responder. Which information would be most useful in assisting the next level responder with data clean-up?

Question236: Which two are the advantages of the Logical PITCs?

Question237: Which two Diagnostic Logging Settings can be configured under the Systems > Servers > Logs - Configuration tab in the Enforce UI? (Select two.)

Question238: You are planning a relayout for a 10GB RAID-5 volume with a RAID-5 log to a stripe-mirror configuration.
Dirty-region logging is indicated by the volume's size.
How would your plan to address the logs?

Question239: Where in the Enforce UI can the administrator find the option to participate in the Supportability Telemetry Program?

Question240: You need to create a new volume. The new volume will only use disks on controller 1. You want to execute the vxassist command with the ctlr:c1 storage attribute. You want to ensure that the command provides desired output.
What should you ensure to meet the required goal?

Question241: You're the administrator of a production database environment, including a large transaction processing complex, a large decision support system, and smaller systems dedicated to supporting functions, such as backups. Uptime is critical, and the DBA for the environment has found the mechanisms at his disposal for sharing data among the environment's functions cumbersome.
How can Storage Foundation's point-in-time copy capabilities help manage the environment more effectively? (Select two)

Question242: How should an administrator export all policies from a test environment to a production environment?

Question243: You want to shrink the volume named payvol to 20 MB and resize the VxFS file system automatically. The volume is in the disk group named hrdg. The volume must be resized on the defined disk group.
What should you do?

Question244: What is the importance of using a CPU in Oracle within the DLP technology?

Question245: You have a customer who has set up a 5 GB full-size instant snapshot volume on one of his file servers.
The data replicated into the snapshot is a combination of code and content elements, which serves as a rapid recovery mechanism in case of a corruption in a new build installed on the server. The customer tells you that the snapshot is working correctly, but that the time it takes to refresh the snapshot is unusually longer than expected. The customer is expecting you to resolve this problem.
How should you resolve this problem?

Question246: An administrator implements a policy to block confidential data from being posted to Facebook. The policy generates incidents but allows the content to be posted.
Which action should the administrator take to resolve this issue?

Question247: You are working with the Storage Foundation Intelligent Storage Provisioning feature, to create a new mirrored volume. To prevent system failure, you want to ensure that you are able to perform a recovery of mirrored volumes in minimum response time.
What should you do?

Question248: You are auditing a current storage environment that is not utilizing storage tiering. The information gained from the audit is to be used in a new storage tiering design that will have 4 tiers, Tiers 1-4. You need to determine the location for data that is not directly related to an enterprise's business, but nevertheless must be retained.
Where should you store this data?

Question249: Identify the sequence in which VxVM performs a relayout on a "target" volume.
1. An extent of the target volume is restructured. 2. Data stored in an extent of the target volume is moved to the scratchpad volume. 3. A temporary subdisk is allocated to stage data in the volume undergoing relayout. 4. Data stored in the scratchpad volume is moved to an extent of the target volume.

Question250: You are managing a Storage Foundation 5.0 server and want to capture an image of a file system at a selected instant for use in applications.
Which feature will you use to capture the image?

Question251: What does the ACTIVE plex state indicate?

Question252: You have installed the Storage Foundation for Sybase. You want to temporarily suspend all write operations to all databases. What should you do?

Question253: You are the administrator for the Veritas Storage Foundation. Using Veritas Volume Manager, you want to migrate an internal boot disk to a SAN boot disk. Given the following steps:
1. Add the target SAN disk to the boot disk group.
2. Create a mirror of the root disk on the target disk.
3. Verify that the Hardware Compatibility List for the target SAN disk being supported for SAN booting.
4. Boot from the mirror disk to verify that the system is bootable.
What are the sequential steps you need to follow to accomplish this?

Question254: You're administering a 10GB volume on a test server that regularly receives new builds that replace most or all of its contents. The build currently under test has an issue that is in the process of being resolved, when a critical production issue arises. Within an hour, the test build you're working with will be overwritten by a copy of the production build, and your working volume under test will be overwritten by a copy of the production build, for its problem resolution.
Given that you don't have time to synchronize a snapshot of your test build before it gets overwritten, what technique can you use to get a snapshot of the test volume ready to preserve the state of your test before testing gets set back a week by being overwritten by the production copy?

Question255: You are responsible for managing Veritas Enterprise Administrator. You are in the process of creating a new disk group. You first initialize an unitialized disk and then create a new disk group using the disk you initialized. You want to ensure that this disk is mounted when you boot the system.
What should you do next?

Question256: Which two options are available when selecting an incident for deletion? (Select two.)

Question257: The 'Administer' button in the Storage Foundation Management Server user interface for a host is continually red, and the vxsvc32 agent is listed as DOWN.
How do you solve this problem?

Question258: A DLP administrator needs to inspect HTTP traffic using a Network Monitor, including data pushed up to the web and data pulled down from the web.
Which configuration changes should the administrator make under the advanced server settings to include all cases?

Question259: You need to provide storage space for database application, including permanent data, temporary space, and activity log data. You need to ensure that the storage space that you provide offers data protection against disk failures. Which storage techniques will you use? (Each correct answer presents part of the solution. Select two.)

Question260: In the administration of a large storage environment, you learn that files not only have differing usages at the times they are created, but that many type of files have individual life cycles. User files do not have a defined lifecycle. You want DST capabilities to manage these files.
How does DST help address this issue?

Question261: Which server target uses the 'Automated Incident Remediation Tracking' feature?

Question262: You are managing Storage Foundation 5.0 server in your organization. When working on Veritas Enterprise Administrator Server, you are prompted with an error message "VxVM Provider initialization warninG. vxinstall has not been run."
What should you do to resolve this problem?

Question263: Which structures are parts of the Cross-platform Data Sharing (CDS) format?

Question264: While administrating the Veritas Volume Manager for Veritas Storage Foundation, you have accidentally destroyed the disk group. You now need to recover the destroyed disk group. You are sure that disk group have not been modified or reused before recovering the disk group.
What step do you need to perform to recover the destroyed disk groups?

Question265: You are assessing a volume configuration in an attempt to improve its performance. You notice that the redo logs are on VxVM RAID-5 volume with user tablespaces and data files. You want to ensure that redo logs are stored as the best practices and guidelines.
What should you do?

Question266: You execute the qio_convertdbfiles command to convert the database files to use Quick I/O. The command results with an error that the database files are not on a VxFS file system. You need to convert the database files to use Quick I/O.
What should you do?

Question267: A DLP administrator needs to improve the reporting performance of the Symantec Data Loss Prevent deployment by archiving incidents. What happens to incidents as a result of using the Incident Archive Flag feature?

Question268: After upgrading the Volume Manager, you are trying to start a vxconfigd daemon. You get the following error messagE. "VxVM vxconfigd ERROR V-5-1-543 Differeing version of vxconfigd installed" How should you resolve this error?

Question269: You need to increase the size of an existing volume to 10 gigabytes. You also want to exclude storages on the controller c1 from being allocated. To meet the required goal, you execute the following command, but when executed, the command fails.
vxassist -g mydg1 growto vol1 10g \use_storage='noneof("Controller"="c1")' What could be the possible cause for the failure?

Question270: An administrator is attempting to check the status of the services for a detection server in the UI. The only option showing under System > Servers > Overview > Server Detail is 'Status'.
What is a possible cause for the server details to show 'Status' only?

Question271: How would you define a template that is used in Intelligent Storage Provisioning (ISP)?

Question272: A DLP administrator needs to have the Email Prevent Server return inspected emails to the same MTA from which it receives the message. In which mode should the Email Prevent server be configured?

Question273: You want to remove the disk named datadg01 from the disk group named datadg. You also want to remove the public and private regions from the disk. However, you want to retain the data stored on the disk. Which commands will you use to achieve this?

Question274: An incorrectable I/O error has occurred on a RAID volume due to a disk failure that caused the data on the disk to become unavailable. For the RAID volume, the subdisk becomes unavailable and is considered stale and detached. What is the RAID level in the volume in this situation?

Question275: Which file is required to decrypt the edpa_ext0.log using the Endpoint Agent logdump utility?

Question276: While encapsulating a disk, you discover that a volume is removed as a part of the existing configuration.
You want to restore the data on the disk as it was before removal of the disk. As the first step, you recreate the volume using the vxdg make command.
What should you do next?

Question277: A company needs to disable USB devices on computers that are generating a number of recurring DLP incidents. It decides to implement Endpoint Lockdown using Endpoint Prevent, which integrates with Symantec Endpoint Protection Manager and Symantec Management Platform. After incidents are still detected from several agents, the company determines that a component is missing.
Which component needs to be added to disable the USB devices once incidents are detected?

Question278: Which structure records are stored in the private region?(Each correct answer presents part of the solution. Select three.)

Question279: You are auditing a current storage environment that is not utilizing storage tiering. The information gained from the audit is to be used in a new storage tiering design that will have 4 tiers (Tiers 1-4). You need to determine the location for archive data which needs to be accessible but is not used heavily.
Where should you store this data?

Question280: You execute the command ps -ef | grep vxatd.
What is the expected output of this command?

Question281: An administrator is attempting to add a new detection server to the Enforce UI. However, the administrator only has the ability to add Network Monitor and Endpoint servers. The option to add a Discover server is missing. What does the administrator need to do to add an additional server type?

Question282: You have created a set of volumes within a disk group.
What is the size of a volume that displays a length of 20480 in a vxprint output, on a Solaris system?

Question283: What is the minimum percentage of spare disks in a disk group?

Question284: You have designed a tiered storage environment using ISP volumes. You have also created the disk group that will be used to hold the tiered volumes. You now want to apply the appropriate tags to the disks. What should you do?

Question285: An administrator needs to deploy a Symantec Data Loss Prevention solution that will monitor network traffic. Which traffic type is excluded from inspection when using the default configuration?

Question286: When you are mounting a file system, which mode sets the policy for handling I/O errors on mounted file system?

Question287: Which response rule action will be ignored when using an Exact Data Matching (EDM) policy?

Question288: What is a collection of VxVM disks that share a common configuration and are used to hold the data for a specific application or set of applications?

Question289: When deploying Network Monitor, an administrator needs to implement monitoring of port-based protocols.
Which protocol is supported by Network Monitor?

Question290: You are monitoring a file system on a Solaris operating system using Veritas Volume Manager when the following kernel message appears: WARNING. msgcnt x: mesg 069: V-2-69: memory usage specified by the vxfs:vxfs_ninode and vxfs:vx_bc_bufhwm parameters exceeds available memory; the system may hang under heavy load.
You need to resolve this error. What should you do?

Question291: You are implementing a tiered storage environment. You are ready to build the first tier.
What is the process you need to follow? (Arrange the following answers in the correct order)
1. Implement storage tiering policies
2. Classify the types of storage in the environment
3. Add the volumes to a volume set
4. Tag the volumes you want to place in this tier

Question292: Refer to the exhibit.

A DLP administrator is planning the deployment of the Symantec Data Loss Prevention with Mobile Email Monitor. Where should the administrator place the Mobile Email Monitor?

Question293: When working on Storage Foundation 5.0 from Storage Foundation Management Server 1.0, you get an error "Could not connect to central server. Central server may not be running." Given the following steps:
1. Start Veritas Private Branch Exchange.
2. Stop the Management server Web applications.
3. Start the Database and Domain Controller.
4. Stop all agents and the Database.
5. Start the Management Server Web Applications.
6. Start VxPAL Agents.
Identify the correct sequence of steps to solve the problem?

Question294: A system administrator has a large amount of data that is not being accessed on the company's storage devices. This excess amount of data is causing slow access to the active data. You want to set up automatic relocation of data so that data expires as per its defined age.
What should you do?

Question295: What is the default naming format for a plex?

Question296: You are accessing the public region of a drive. You get an error message stating that the disk has failed.
What could be the possible reason for this message?

Question297: After installing the Volume Manager, you need to configure the Volume manager for large number of servers. You also need to consider the capacity and performance in installed environment. You want to optimize the performance of mirrored volumes by applying default Volume Manager policy. Which policy will you apply to get performance of mirrored volumes?

Question298: The chief information security officer (CISO) is responsible for overall risk reduction and develops high- level initiatives to respond to security risk trends.
Which report will be useful to the CISO?

Question299: You have the hot-relocation feature enabled on your Storage Foundation Server. However, you are getting a disk failure error and you want to resolve the problem by using the vxrelocd daemon. Identify the correct sequence of steps that you will perform to resolve this problem?
1. Inform the administrator regarding the failed disk by electronic mail.
2. Initiate the appropriate recovery procedures.
3. Detect the failure by vxrelocd daemon to the failed disk.
4. Determine if any subdisks can be relocated.